Avoid frequent braking and starting when electric bicycles are driving. Before braking or at the same time, turn the speed control knob back into position, and try to use manpower to ride in the road-supported area. In this way, the battery can be damaged by high current during starting.

The standard load capacity of electric bicycles is 75 kg, and overloading should be avoided as much as possible. If you are driving with overload, you should use manual riding and manual assist.

When using an electric bicycle in cold weather, you should try to drive with manual or electric assist. And you should also pay attention to the battery power and voltage indication. Generally, when the weather is cold, the depth of discharge of the battery should be appropriately reduced, and you must not drive under voltage. This is because the charging capacity and discharging capacity of the battery are reduced when the weather is cold.

Electric bicycles are not afraid of rain and snow. However, the water level cannot exceed the lower edge of the electric wheel hub bearing seat when wading water to prevent damage to the motor caused by water ingress. After riding in rain or snow, wipe it off as soon as possible. If the electric device is immersed in water, you should also use a hair dryer to dry it. So as not to cause corrosion of iron parts, circuit leakage, short circuit and other faults.